特價

樹莓派不斷電系統(UPS)(HV3.0B+)(進階版)

NT$ 1,980 (含稅)

 

英國製造

支援Raspberry Pi A+/B+/2B/3B//3B+/Zero/Zero W

斷電時至少可供電10-15分鐘

備用電源可升級,斷電時最多可供電32小時

輸出電流3.0A

1 件庫存

描述

Print Friendly, PDF & Email

樹莓派不斷電系統(UPS)(HV3.0B+)(進階版)

UPS PIco HV3.0B+ Stack 450 Advanced is an advanced uninterruptible power supply for the Raspberry Pi A+/B+/2/3, that adds a wealth of innovative power back-up functionality and development features to the innovative microcomputer! The UPS PIco will automatically shut-down your Raspberry Pi if there is a power failure, and can be set to automatically monitor and reboot your Pi once power has been restored!

In addition to all the features contained in the standard UPS PIco, the UPS PIco HV3.0B+ Stack Advanced features the following:

  • Extended Voltage Input 7 – 28V DC – Protected with Zero Voltage Drop Inverse Polarity Protection, PPTC Over-current, and ESD. Ideal for Cars, Trucks, Buses and any industrial high voltage applications.
  • Dynamic Power Tracking (DPT) – Charges the battery according to available input power from 100 mA – 1200 mA. DPT checks the input current every second, and adjusts the charging current based on this value making it ideal for Solar Panel applications.
  • Bi Stable (Zero Power) Relay – With dual separated independent contacts
  • Optical Isolated Input (Opto-Coupler) – Readable as A/D values

The UPS PIco is equipped with a 450mAh LiPO battery specially designed to enable safe shutdown during a power cut. Additionally, this can be easily upgraded to the extended 4000mAh or 8000mAh versions, which enables prolonged use of a Raspberry Pi for up to 16 hours without a power supply connected!

The UPS PIco features an embedded measurement system that continuously checks the powering voltage of the Raspberry Pi. When the cable power on the Raspberry Pi is absent, insufficient, or the device detects a power failure, the UPS Pico automatically switches to the unit’s battery source. The module then continues to check the voltage on the Pi and switches automatically back to the regular cable supply when power is once again available.

The UPS PIco is powered and the battery pack intelligently charged via the GPIO pins on the Raspberry Pi, so no additional cabling or power supply is required. Because the UPS Pico requires no external powering and fits within the footprint of the Raspberry Pi, it is compatible with most cases.

The UPS PIco can also be equipped with an optional Infra-Red Receiver which is routed directly to GPIO18 via the PCB for remote IR operations. Additionally the PIco includes an Automatic Temperature Control PWM FAN controller, and can be equipped with a Micro Fan Kit, which enables the use of the Raspberry Pi in extreme conditions including very high temperature environments. The UPS PIco is designed to be 100% compliant with HAT standards for the Raspberry Pi and includes a Gold Plated Reset Pin, with install locations for the Raspberry Pi Zero, B+/2 and 3.

Feature List

  • Raspberry Pi HAT Compliant
  • Plug and Play
  • Smart Uninterruptible Power Supply (UPS)
  • Integrated 450mAh LiPO Battery (10-15 Minutes of Power Back-Up)
  • Interrupt Driven Interaction (Low Memory/CPU Use)
  • Software Driven Email Broadcasting
  • Intelligent Automatic Charger w/ Power Tracking
  • No Additional External Power Required
  • Supports LiPo & LiFePO4 (Long Life) Batteries
  • 5V 3A Power Backup for even the most demanding Pi 3 set ups.
  • Integrated Hardware Real Time Clock (RTC) with Battery Back-Up
  • File Safe Shutdown Functionality – Single Button On/Off
  • Raspberry Pi Zero/B+/2/3 Activity Pin
  • PWM FAN Control (Fan Not Included)
  • 3 User Defined LEDs
  • 3 User Defined Buttons
  • Integrated Buzzer for Audible Alerts (Buzzer Included but Not Soldered)
  • Status Monitoring – Powering Voltage, UPS Battery Voltage/Current and Temperature
  • I2C PICo Interface for Control and Monitoring
  • RS232 Raspberry Pi Interface for Control and Monitoring
  • 2-Way XTEA Based Cryptography User Software Protection
  • 2 Level Watch-dog Functionality with FSSD and Hardware Reset
  • Raspberry Pi Hardware Reset Button via Spring Test Pin (Gold Reset Pin Included)
  • Jumpers for Raspberry Pi Pin Functionality Selection
  • Stackable Header for Add-On Boards (Header Included)
  • Boot Loader for Live Firmware Update
  • Integrated ESD-Protected 3 Channel A/D 10 Bit Converters 0-5.2V
  • Integrated ESD-Protected 1-Wire Interface
  • Labelled J8 Raspberry Pi GPIO Pins for Easy Plug & Play
  • Infra Red Receiver Sensor Interface (IR Not Included)
  • Intelligent IR Remote Power ON/OFF if IR receiver installed (Not Included)
  • Upgradable with PIco Add-on Boards
  • Fits Inside Most Existing Cases
  • Events Triggered RTC Based System Actions Scheduler (ON/OFF based on RTC or Events e.g Voltage, RS232 data, A/D, IR)
  • Auxiliary 5V @ 750mA Power Output w/ Battery Backup; PPTC Fuse and Reverse Current Protected
  • The UPS PIco Uses the Following Pins
    • Serial Port (Firmware Updates): GPIO14 (Pin8) & GPIO15 (Pin10)
    • i2c Port: GPIO2 (Pin3) & GPIO3 (Pin5)
    • Pulse Train: GPIO27 (Pin13) & GPIO22 (Pin15)

UPS PIco Advanced Additional Features:

  • Bi Stable (Zero Power) Relay – With dual separated independent contacts
  • Optical Isolated Input (Opto-Coupler) – Readable as A/D values
  • Extended Voltage Input 7 – 28V DC Protected with Zero Voltage Drop Inverse Polarity Protection, PPTC Over-current, and ESD
  • Dynamic Power Tracking (DPT); charges the battery according to available input power from 100 mA – 1200 mA. DPT checsk the input current every second, and adjusts the charging current based on this value making it ideal for Solar Panel applications.

Optional Extras (Not Included)

  • 4000mAh, 8000mAh or 12000mAh batteries; available for up to 32 Hours Run-Time. Battery Packs include mounting base.
  • Fan Kit; which includes micro fan, TO-92 Temperature sensor and mounting hardware
  • Terminal Block Add-on Board; with A/D Converter, Voltage Follower & 12V RS232 Interface
  • UPS PIco Case

Downloads & Installation Guides

Installation Guides

Manual

UPS PIco Wiki

 

Print Friendly, PDF & Email
  1. 安裝前須將開關切到 OFF 關閉電源,否則容易短路。
  2. 安裝完成確保頂針完全對準排針後再打開電源。
  3. 頂針不導通可以壓一下頂針再鬆開或者用刀劃掉排針的氧化層。
  4. 首次連接電池需要注意 WARNING LED 燈是否亮起,如果 LED 燈亮起,則表示對應的電池接反了,電池接反的情況下禁止充電。
  5. 首次連接電池有可能會沒有電源輸出,需要按一下 BOOT 啟動按鍵或者充一下電啟動電池保護晶片,才會有電源輸出。電源開關需要切到 ON 的位置。
  6. 長時間工作大電流建議不要超過 4A,長時間工作在 5A 狀態下會發熱升溫,注意散熱。
  7. 要使用產品配置的電源充電,使用其他電源有可能輸出電源不穩定導致產品損壞。
  8. 電池正極絕緣墊如果弄掉或壞了,建議不要繼續使用,容易導致短路起火,拆電池時切忌用螺絲起子撬電池正極,容易導致短路,要撬要撬電池負級。
Print Friendly, PDF & Email

鋰電池使用注意事項:

    1. 鋰聚合物和鋰離子電池很不穩定,如果充電或使用不當,可能引起火災,導致人身傷害和財產損失。
    2. 對電池組充電和放電時,切勿正負極接反。
    3. 請勿選用其他劣質充電器或充電板充電。
    4. 請勿混用和使用舊電池和新電池,避免使用其他品牌電池。
    5. 若需另購鋰電池產品,需確保電池規格與鋰電池擴充模組相容,建議採用正規廠商電池較佳,切需要執行老化測試,確保鋰電池能夠穩定安全工作。
    6. 鋰電池具有循環壽命,請在達到使用壽命或使用兩年時(先到為準),將舊電池更換為新電池。
    7. 請妥善放置電池類產品,遠離易燃易爆類物品,遠離兒童,避免因保管不慎,引發安全事故。

您可能也喜歡…