特價

49. 樹莓派 Raspberry Pi SPI AD/DA & I2C 1-Wire 擴充板 (V2-P5 )(10bit A/D, 8-12bit D/A)

NT$ 1,528 (含稅)

 

英國Pridopia公司設計製造

工廠直營,提供技術支援,保固3個月

適用樹莓派B

售價含稅,隨貨附發票

歡迎來信選購或洽詢

已售完

描述

Print Friendly, PDF & Email

49. 樹莓派 Raspberry Pi SPI AD/DA & I2C 1-Wire 擴充板 (V2-P5 )(10bit A/D, 8-12bit D/A)

一、產品特色

1. Support Raspberry Pi-V2 P5 , got extra 4 GPIO 28,29,30,31

 The 1-Wire port is based around a DS2482-100 I2C to 1-Wire bridge device. The DS2482-100 provides bi-directional protocol conversion between the I2C port on the Raspberry Pi and any attached 1-Wire® slave devices. An ESD Protection Diode is used to protect the Board and Raspberry Pi from electrostatic spikes on the 1-Wire port. Connections to the 1-Wire port can be made through pin on the PCB.

2. J2 J3  Step motor connector J2 (5V,D0,D1,D2,D3)  J3(5V,D4,D5,D6,D7) 

      can use Step motor (28BYJ-48 5VDC)48 5VDC)48 5VDC)48 5VDC)8 5VDC)

3. J20   5V,GND, D0, D1,D2,D3,D4,D5,D6,D7   OUTPUT

4. U5 ULN2803 8 darlington transistor array

5. J17  RS-Pi-V2 GPIO output      

6. J19  i2c output (GND,5V,SDA,SCL)

7.  JP4 choose 5V input from Mini USB Port J7 or RS-Pi 5V

 8. J7  Mini USB 5V input

 9. U6 MCP3002 SPI Interface  10 bit Analog-to-Digital Converter 

     output   J11  (Vcc, AD0, GND, AD1) Datasheet

 10. U11 MCP4802  SPI Interface 8 bit Digital-to-Analog Converter  

      or U11 MCP4802 SPI Interface 10 bit Digital-to-Analog Converter   

      or  U11 MCP4802 SPI Interface 12 bit Digital-to-Analog Converter   

       output JP1 (DA0,GND,DA1,GND) Datasheet

You can choose 8 bit , 10bit or 12 bit  DAC ,

 11. U15 DS2482-100 I2C to 1-Wire bridge device Datasheet

      J22 1-wire Port pin 1 – pin4 

      (5V, GND, OW (1-Wire Data, ESD Protected). RT (1-Wire Return/Ground ,ESC protected)

 12. U16 DS9503P ESD protection diode

13. D8,D9, D10, D11  GPIO 28,29,30.31 output LED                       

 14. U5 uln2803  use  RS-Pi  pin 11,12,13,15,16,18,22,7 as GPIO 0 to GPIO7

 15. MCP3002 use 10k ohm Trimpot  for INPUT DEMO


16. MCP4802 OUTPUT  DEMO

17. You also can use gertboard program atod & dtoa in this board

18. 18  -> DS2482-100    I2C  1-Wire  bridge chip

 /28.7E1CC8030000    –  Connect   &  Detect  DALLAS 18B20P   TEMP Sensor


cat temperature   —    22.312    &  32.125

 二、範例程式下載

 SPI AD/DA.c

 mcp4802.c  

 1step.py    for 1 Step Motor on J2 

 2step.py for 2 Step Motor on J2 J3

 2step-v2.py for Rs-Pi V2 2 Step Motor on J2 J3             

 三、產品內容

 1x Rs-Pi 2803-AD-DA – i2c-1-Wire board

 1x 2×4 (8P)2.54mm pitch header for Raspberry Pi  P5 connector

1x manual 

商品評價

目前沒有評價。

搶先評價 “49. 樹莓派 Raspberry Pi SPI AD/DA & I2C 1-Wire 擴充板 (V2-P5 )(10bit A/D, 8-12bit D/A)”
Print Friendly, PDF & Email
項次 Sense HAT (B) Sense HAT (C) 樹莓派 Sense HAT 備註
陀螺儀 測量範圍:±250/500/1000/2000 dps
分辨率:16位
測量範圍:±16/32/64/128/256/512/1024/2048 dps
分辨率:16位
測量範圍:±245/500/2000 dps
分辨率:16位
C型角速度可選量程更多
加速度計 測量範圍:±2/4/8/16 g
分辨率:16位
測量範圍:±2/4/8/16 g
分辨率:16位
測量範圍:±2/4/8/16 g
分辨率:16位
磁力計 測量範圍:±49 gauss
分辨率:16位
測量範圍:±49.12 gauss
分辨率:16位
測量範圍:±4/8/12/16 gauss
分辨率:16位
C型磁力測量範圍更廣
氣壓計 測量範圍:260 ~ 1260 hPa
測量精度(常温下): ±0.025hPa
測量速率:1 Hz – 75 Hz
測量範圍:260 ~ 1260 hPa
測量精度(常温下):±0.1 hPa
測量速率:1 Hz – 25 Hz
測量範圍:260 ~ 1260 hPa
測量精度(常温下):±0.1 hPa
測量速率:1 Hz – 25 Hz
B、C型大氣壓測量的精度更高,速率更快
溫溼度感測器 測量精度(溼度):±2% rH
測量範圍(溼度):0% ~ 100% rH
測量精度(温度):±0.2°C
測量範圍(温度):-30 ~ 100°C
測量精度(溼度):±2% rH
測量範圍(溼度):0% ~ 100% rH
測量精度(温度):±0.2°C
測量範圍(温度):-30 ~ 100°C
測量精度:±4.5% rH
測量範圍:20% ~ 80% rH
測量精度(温度):±0.5°C
測量範圍(温度):15 ~ 40°C
B、C型温溼度測量的精度更高,範圍更廣
其他 颜色識別感測器
高精度12位元AD轉換晶片
颜色識別感測器
高精度12位元AD轉換晶片
8×8 RGB LED矩陣
五向摇桿
B、C型內建颜色識別感測器,支援AD連接更多感測器